2. Ubiquiti
  3. Power Beam
  4. Ubiquiti PBE-5AC-620-EU
Ubiquiti Powerbeam PBE-5AC-620 View larger

Ubiquiti PBE-5AC-620-EU

PBE5AC620

New product

Ubiquiti Networks PBE-5AC-620 PowerBeam ac High-Performance airMAX Bridge

More details

This product is no longer in stock

Whatsapp MB WhatsApp

Rs 63,590

Call | Whatsapp

Karachi: +92-300-0339084 , +92-213-2270926 , +92-213-2270927

For Information & Quotation Email: sales@mbcommunication.com.pk

More info

Product Information:

Ubiquiti PBE-5AC-620-EU Features and Benefits

Features:

Ubiquiti PBE-5AC-620-EU Description

  • Model No
 PBE-5AC-620-EU
  • Frequency
 5 GHz
  • Throughput
 450+ Mbps
  • Gain
 29dBi
  • Management Radio
 No
  • Ports
 (1) 10/100/1000 Ethernet Port
  • Range
 30+ km
  • Wind Loading
 872 N @200 km/h (196 lbf @125 mph)

Overview

The PBE-5AC-620 PowerBeam ac High-Performance airMAX Bridge from Ubiquiti Networks is suitable for CPE deployments requiring maximum performance. A dish reflector design with proprietary airMAX ac technology, offers improved latency, noise immunity, scalability, and significantly increased throughput performance of up to 450+ Mb/s and also offers wide range of 19+ mi (30+ km). The InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for cables to connect the radio to the antenna. This improves performance while eliminating cable losses. Ubiquiti's airMAX engine with custom IC improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.

The PowerBeam ac's enhanced beam directivity provides optimal performance in high-noise environments. The TDMA airMAX protocol enables optimal scalability, high throughput, and low latency in unlicensed, multi-point networks. It supports airMAX ac protocol and has a long-range Point-to-Point (PtP) link mode. This offers selectable channel width of 10/20/30/40/50/60/80 MHz in PtP and 10/20/30/40 MHz in PtMP. Integrated airMAX ac technology boosts the advantages of proprietary TDMA protocol. The mounting bracket of the PowerBeam offers 20° of uptilt and 10° of downtilt, while the mounting bracket offers ± 15° of tilt.

Noise Immunity

The PowerBeam ac directs RF energy in a tighter beamwidth. With the focus in one direction, the PowerBeam ac blocks or spatially filters out noise, to improve noise immunity. This feature is important in an area crowded with other RF signals of the same or similar frequency.

Integrated Design

Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Featuring high performance and innovative mechanical design, the PowerBeam ac is versatile and cost-effective to deploy.

airOS

Designed for improved usability, airOS v7 is the enhanced operating system for Ubiquiti airMAX ac. It supports airMAX ac protocol and has long-range Point-to-Point (PtP) link mode. This offers selectable channel width of 10/20/30/40/50/60/80 MHz in PtP and 10/20/30/40 MHz in PtMP. Additionally, this PowerBeam features automatic/manual transmit power control, automatic distance selection (ACK timing), and a strong WPA2 security.

Usability Enhancements

airOS offers usability enhancements such as dynamic configuration changes*, instant input validation, HTML5 technology, optimization for mobile devices, detailed device statistics, comprehensive array of diagnostic tools, including Ethernet cabling test, RF diagnostics, and airView spectrum analyzer.
Note:
airControl does not work with airMAX ac products.

Advanced RF Analytics

airMAX ac devices feature a multi-radio architecture to power an enhanced RF analytics engine. An independent processor on the PCBA powers a second, dedicated radio, which analyzes the full 5 GHz spectrum and every received symbol to provide you with the advanced RF analytics in the industry. Data from the spectrum analysis and RF performance monitoring is displayed on the main tab and airView Spectrum analyzer of airOS V7.

Real-Time Reporting

The main tab displays the RF information such as, persistent RF Error Vector Magnitude (EVM) constellation diagrams, Carrier to Interference-plus-Noise Ratio (CINR) histograms, and Signal-to-Noise Ratio (SNR) time series plots.

Spectral Analysis

airView allows you to identify noise signatures and plan your networks to minimize noise interference. airView constantly monitors environmental noise, collects energy data points in real-time spectral views, and helps optimize channel selection, network design, and wireless performance. airView runs in the background without disabling the wireless link, so there is no disruption to the network.

In airView, there are three spectral views, each of which represents different data. Waterfall represents aggregate energy collected for each frequency, Waveform represents aggregate energy collected, and ambient noise level background represents noise energy shown as a function of frequency. airView provides powerful spectrum analyzer functionality, eliminating the need to rent or purchase additional equipment for conducting site surveys.

airMAX Technology

Unlike standard Wi-Fi protocol, Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class. With Intelligent QoS priority assigned to voice/video for seamless streaming it is capable of high-speed, carrier-class links with long distance.

airMAX ac Technology

The airMAX ac technology boosts the advantages of proprietary TDMA protocol. Ubiquiti's airMAX engine with custom IC improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.

Throughput Breakthrough

airMAX ac supports high data rates, which require dense modulation, 256QAM is a significant increase from 64QAM, which is used in airMAX. With the use of proprietary airMAX ac technology, airMAX ac products supports up to 450+ Mb/s real TCP/IP throughput up to triple the throughput of standard airMAX products.

Innovative Mechanical Design

The mounting bracket of the PowerBeam offers 20° of uptilt and 10° of downtilt, while the mounting bracket offers ± 15° of tilt. Only a single wrench is required to mount the PowerBeam ac on a pole. The antenna feed can be detached with the push of a button. Its fasteners are GEOMET-coated for improved corrosion resistance when compared with zinc-plated fasteners. Dish and brackets are made of galvanized steel that is powder-coated for enhanced corrosion resistance. The pole bracket design prevents paint from being removed from the metal brackets for improved corrosion resistance.

Key Features

  • Atheros MIPS 74Kc, 720 MHz Processor
  • 128 MB DDR2, 8 MB Flash Memory
  • 450+ Mb/s Transfer Speed
  • 19+mi (30+ km) Range
  • airOS v7 Operating System
  • Time Division Multiple Access (TDMA)
  • InnerFeed Technology
  • Multi-Radio Architecture
  • Next Generation airMAX ac Technology
  • Selectable Channel Width

Ubiquiti Networks AirMAX Specs

Wireless
Wireless Frequency Bands 5 GHz
Sensitivity -65 to -96 dBm
Antenna Gain 29 dBi
Transmit Power 20 to 24 dBm
Interface
Ports 1 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) PoE
Hardware
RAM 128 MB
Storage Capacity 8 MB
Processor 720 MHz MIPS 74Kc
Electrical
DC Input Power 20 to 26 VDC at 0.5 A
Power Consumption 8.5 W
Environmental
Operating Temperature -40 to 158°F / -40 to 70°C
Operating Humidity 5 to 95%
General
Certifications CE, FCC, IC, RoHS, as per Manufacturer
Mount Options Pole
Dimensions 24.41 x 24.41 x 15.2" / 620 x 620 x 386 mm
Weight 14.11 lb / 6.4 kg
Packaging Info
Package Weight 22.5 lb
Box Dimensions (LxWxH) 29 x 28 x 9.5"

Reviews (0)